Solar and Heat Pumps: Plan the Loads Together
Coordinate a building-specific heat-pump design with seasonal solar production, electrical capacity and utility billing before committing to either installation.
Published by Home Solar Simplified · Editorial standards
https://homesolarsimplified.org/solar-guides/solar-for-heat-pumps
Published by Home Solar Simplified. Includes 10 linked sources. Documented editorial date: .
A citation or editorial date does not guarantee a tariff, incentive or program remains unchanged today.
Describe the heating change before estimating the solar change
Replacing a gas furnace with a heat pump adds electric heating demand while reducing gas consumption. Replacing electric resistance heating with a heat pump can have a different effect on electricity use. Replacing an air conditioner may change cooling consumption as well. The starting equipment matters, so a solar model should identify what is being removed, what remains and what new service the household expects. A heat pump that adds cooling to a previously uncooled home is not simply a like-for-like replacement.
Write down whether the project covers the whole house, selected rooms, an ADU or domestic hot water. A space-conditioning heat pump and a heat-pump water heater are separate appliances with different schedules. Specify any remaining gas or resistance backup and the proposed control sequence. Without that scope, two contractors may make incompatible assumptions: the HVAC bidder may assume partial electrification while the solar bidder assumes all heating will move to electricity.
November 6, 2026 update: separate SFV electrification incentives opened November 2
TECH Clean California opened a separate Aliso Canyon priority-community San Fernando Valley single-family incentive allocation on November 2, 2026. The program is available for eligible applicants, not automatically for every Valley household. A listed priority ZIP code is only an initial geographic screen: verify the actual home through TECH's customer-verification portal and work with a contractor enrolled for this particular program. Neither a ZIP match nor an installer estimate proves eligibility or reserved funds.
The published market-rate ranges include $2,000–$5,000 for heat-pump HVAC and $2,000–$3,500 for heat-pump water heaters. The income-qualified tier, below 80% of area median income, includes additional equipment and weatherization support, subject to eligibility. TECH states that contracts signed, invoices, permits opened or installations begun before the November 2 launch do not qualify for this SFV program. Use a properly enrolled and trained contractor, confirm the applicable reservation rules in writing before committing, and do not assume that every other incentive can be stacked.
Separate the new SFV offer from fully reserved statewide programs
As checked November 6, 2026, general statewide TECH single-family heat-pump HVAC and water-heater incentives remain fully reserved. HEEHRA single-family funding also remains fully reserved statewide, and new single-family income-verification applications are no longer accepted. A waitlisted HEEHRA project is eligible only if installation follows an approved reservation. These statewide holds are separate from the SFV priority-area single-family allocation that opened November 2.
For immediate alternatives, an eligible SCE household can ask its Energy Savings Assistance program about assessed heat-pump or appliance measures. LADWP customers should check LADWP programs rather than treating an SCE offer as transferable. Keep any utility efficiency assessment and current reservation decision separate from the solar system's energy model.
Get the building load calculation first
ENERGY STAR recommends that the HVAC contractor verify equipment sizing using a Manual J heating and cooling load calculation. That calculation considers what the home needs at design conditions; it is not the same as reading the old furnace's nameplate or selecting equipment solely by floor area. Ask for a written result and the inputs used, including insulation, windows, leakage assumptions, design temperatures and indoor comfort targets.
Tell the contractor about planned envelope improvements before final equipment selection. Air sealing, insulation, window work or duct repair may change the load the new system must serve. Coordinate the timing so the HVAC and solar estimates do not assume opposite versions of the home. If improvements are uncertain, ask for a present-condition case and an improved-condition case. A traceable calculation lets you evaluate the tradeoff instead of relying on a generic percentage reduction.
Capacity, efficiency and annual energy are different quantities
Heating capacity describes heat delivered under specified conditions, while electrical demand describes the power the equipment draws. Annual kWh depends on operating hours, weather, part-load performance and controls. A heat pump's nominal size is therefore not enough to determine the number of solar panels it needs. Ask the HVAC contractor for an estimated monthly electricity profile and the method behind it, then give that profile to the solar designer.
Manufacturer performance at the relevant outdoor temperatures is important, particularly where colder conditions reduce available capacity or supplemental heating operates. PNNL's sizing guidance emphasizes load calculation and equipment selection rather than a single nominal rating. Ask when auxiliary heat is expected to run and whether its energy is included in the forecast. A bill model that assumes only compressor operation while the installed controls frequently enable resistance backup can understate winter consumption.
Avoid counting existing cooling twice
A household's current electric bills may already include air-conditioning energy. If a heat pump replaces that air conditioner, adding the entire forecast for the new unit on top of the historical bill double-counts part of the cooling load. The model should remove the estimated electricity of the replaced equipment and add the new equipment's electricity. The same issue applies when an existing electric water heater is replaced by a heat-pump water heater.
If the new system conditions more rooms or maintains a different temperature, label the change in service explicitly. Improved comfort can be a worthwhile benefit, but it complicates a claim about savings. Ask the estimate to separate equipment efficiency from increased use. A household may consume more total electricity after electrification while still using energy more efficiently and purchasing less gas; those observations should be reconciled rather than treated as contradictions.
Model winter heating and solar production together
Annual totals hide the central coordination problem: heating demand and solar output can peak in different seasons and at different hours. A sunny annual production estimate does not show how much electricity will be purchased on a cold evening. Request monthly heat-pump demand and monthly solar generation as a starting point, followed by interval modeling where practical. Include mornings, evenings and any time the home remains occupied throughout the day.
Consider an illustrative home with an assumed additional 3,000 kWh of annual heating electricity and an array producing an assumed extra 3,000 kWh annually. The equal totals do not prove a zero additional bill. If much of the heating occurs after sunset or during lower-production months, the utility still supplies that electricity, with solar exports credited according to the account's rules. These are invented quantities to explain timing, not a recommended system size.
Choose controls around comfort and the tariff
Ask the HVAC contractor how the proposed thermostat and equipment should operate efficiently, including any auxiliary-heat settings. Do not impose aggressive setbacks or preheating routines solely to match a solar forecast without checking comfort and equipment behavior. A scheduling strategy that triggers more backup heat or leaves rooms uncomfortable can undermine the intended result. The operating plan should be understandable enough for everyone in the household to follow.
Where flexible operation is practical, compare it under the actual utility tariff. Daytime water heating or modest preconditioning may change purchases and exports, but the financial effect depends on both import prices and export treatment. A municipal net-metering account and an investor-owned utility's current net-billing account should not share one assumed solar value. Ask the estimate to state the tariff, the operating schedule and how sensitive savings are to a less flexible routine.
Coordinate electrical and installation work
Have the electrical contractor evaluate the complete future equipment list, including the heat pump, auxiliary heating, water heater, EV charger and any other planned electrification. Ask which work is necessary for the selected equipment and which work is optional preparation. The HVAC and solar companies should agree who supplies circuits, disconnects, permits and any panel changes. A shared project does not guarantee that either contractor has included the other's requirements.
Request itemized prices for duct work, refrigerant-line work, condensate routing, equipment supports, electrical work and controls. PNNL's installation guidance emphasizes appropriate equipment selection and verified installation details. A lower equipment price can be misleading if it omits work needed for airflow or distribution. Make sure rooms with closed doors, remote additions or other comfort problems are addressed in the design rather than assuming the new equipment will fix them automatically.
Keep battery backup and incentives out of the base energy estimate
A battery selected to support a refrigerator and lights may not support an entire heat-pump system for the desired outage duration. Ask for the heat pump's operating and starting requirements, battery power limit, usable energy and prioritized loads. Include auxiliary heat in that discussion. A proposal should describe the specific equipment that remains available during an outage, not simply call the installation whole-home backup.
Evaluate funding only after identifying the correct utility, program, equipment and application timing. Incentive availability can change and should not be assumed from an old tax-credit article or a contractor's generic brochure. Obtain the current written eligibility and reservation terms directly from the administering program. Keep the equipment's operating-cost comparison understandable before incentives so that an uncertain award does not obscure whether the combined project meets the household's needs.
Use the first full seasons to refine operation
Save the load calculation, equipment specifications, solar forecast and commissioning records. Track electricity, gas where retained, thermostat settings and unusual weather after installation. Compare similar seasons and record when the equipment or controls were changed. A single cold month immediately after commissioning is not an adequate annual performance comparison, especially if the household is still learning the new controls.
If consumption exceeds the forecast, investigate installation and operating issues before ordering more solar. Ask the HVAC contractor to review airflow, controls, auxiliary heat and the comfort conditions used in the original model. Ask the solar installer to verify production separately. Additional panels may address an energy shortfall, but they will not repair poor air distribution or a misconfigured thermostat. A coordinated diagnosis protects both comfort and the financial case.
Frequently asked questions
Can my current electric bill be used to size solar before a heat-pump conversion?
It is a useful baseline, but it must be adjusted for the equipment being replaced and the new load. Ask the HVAC contractor for a building-specific energy estimate and give the same assumptions to the solar contractor. Keep current-condition and future-condition results separate so the effect of the conversion is visible.
Does a heat pump require a battery?
No. A grid-connected heat pump can buy electricity when solar is unavailable. Storage is a separate option for shifting energy or supporting approved backup loads. Compare its incremental benefit under the utility rules and require a specific outage design if operating the heat pump during a blackout is a priority.
Should I install solar or the heat pump first?
The practical order depends on equipment condition, roof work, electrical work and available information. Coordinate the designs before either contract is finalized. If the heat pump operates first, measured seasonal use can improve solar planning; if solar comes first, document realistic future heating demand and any limits on later expansion.
Check eligibility and take the next step
These links open the official program or its application service.
Verify SFV priority-area home and enrollment requirements Recheck statewide heat-pump incentive statusQuestions worth asking
- Which existing heating and cooling loads are being removed from the baseline?
- What Manual J calculation and equipment performance support the selection?
- How much monthly kWh includes auxiliary heating?
- What winter and evening imports remain under my utility rules?
- Who coordinates circuits, ducts, controls, commissioning and backup scope?
Related guides
Account for seasonal heating and cooling electricity useCheck panel capacity for heat-pump electrificationSeparate heat-pump energy needs from battery backup capabilityStill researching solar?
Search homeowner guides by topic, electric utility, or location.
Sources and further reading
Updated: October 2026. Confirm changing details with the official sources.
These links identify documents and resources used for this guide. Listing a source does not mean it was independently checked today. Utility rates, incentives, product specifications and program availability may change; confirm the latest version and effective date with the source.
ENERGY STAR — Air-Source Heat Pumps: sizing guidancePNNL Building America Solution Center — Cold Climate Heat Pump Sizing and SelectionPNNL Building America Solution Center — Heat Pump ReplacementENERGY STAR — Heat Pump Water Heater Design ConsiderationsU.S. DOE — Purchasing Energy-Efficient Residential Air-Source Heat PumpsTECH Clean California — SFV incentive eligibility and amountsTECH Clean California — November 2 launch and customer verificationTECH Clean California — SFV contractor requirements and project start datesTECH Clean California — statewide single-family funding statusSCE — Energy Savings AssistanceStart with a home energy checkup
Organize your usage, home details and goals before comparing proposals.
Try the home energy checkupReady to compare companies?
Explore provider options when you are ready to request quotes.
Explore provider options